Specification New design, 1X, 2X, 4X, 8X, 16X compatible (1-16X and 16-16X can be used), PCIe circuit board cable is born to dig new Safer and efficient, more practical! Traditional spot welding is brittle, easy to burn, signal transmission attenuation, cable length is not a problem. Choose New PCIe conversion, all these problems to solve! Dear: for each batch of materials (socket + button color) may have a different color, the color does not affect the product's performance and use. Thanks for understaning. Product Features: A: The graphics power uses two FP solid capacitors, the card supply is more secure. B: The transfer cassette port or 4PIN interface strengthens the power supply, so that the graphics power is independent from the motherboard , thereby reducing the load on the graphics card. C card slot: the original goods to the graphics card connector is better. D: PCI-E connector using multilayer shielding the longest wire can take 3M without signal attenuation E: Comparison of soft comfortable cable wire, want to put it on the card. F:PCI-E connector plug is all gold, more wear and increase conductivity. G: slot with fixed buckle, convenient disassembly and fixed graphics card, the card will not fall out of the slot. Matters requiring attention: 1 line extension applies to motherboard PCI-E slot (1X 2X 4X 8X 16X). Please use insert the floppy drive power line. PCI-E plug to extend the line must be the computer from the wire and then plug it in. When in use must see Notes! 2 adjustable support rods, not really getting the line to. Remember! 3 wire must see clearly the direction, do not insert or insert the deflection, prevent burning of the device, plug the line to hold the device And then plug it in, to avoid excessive force Reggie socket pin interfere. 4 small 4PIN heads (floppy disks) are standard parts with anti-lock buckles, inserted into the middle of the seat buckle after the seat hook, so it is not easy to fall off. When the swap line must be careful, not pulling, such as difficult to pull THREAD or plastic transposons pull out, we can first put the line to pull, that is, first bend the position released from the Chair and then pull out. 5 suggestions: dual core graphics and the motherboard is 16X, also suggest to use the old cable!!!